EBV Series Brass Motorized Regulation Ball Valve

EBV series brass motorized regulating ball valve is applicable to central air conditioning system or heating system. According to the floating-point or proportional signal (DC 0/2~10V or DC 4/0~20- mA) from PLC, DDC and thermostat, the opening of the valve is adjusted to control the flow of the medium in the pipeline and to meet the accurate control of the flow, pressure,
and temperature.

Download

Features

On/off:2 or 3 float point control
Analogue: proportional control
DC reversible motor adopted
Manual operation available for all standard models
Plastic connection part, the heat on the valve body is not easily transmitted to the actuator
Passive feedback, 2 position feedback switches are optional
Equal percentage flow-rate characteristics
DN15-DN50 thread connection

Matching of Actuator & Valve Body

Torque of Actuator 4Nm 6Nm
DN DN15 DN20 DN25 DN32 DN40 DN50
Shut-off Differential Pressure 0.4MPa 0.4MPa 0.4MPa 0.4MPa 0.4MPa 0.4MPa

Specifications of Actuator

Control Type 3 points floating Proportional Control
Power Supply 24VAC/DC 220VAC 24VAC/DC 220V/AC
Frequency 50/60Hz
Torque 4Nm / 6Nm
Operation Time 15-25s
Running Power Consumption 4.5W
Standby Power Consumption 0.5W
Cable 3A    250V/AC
Control Signal 2 wire or 3 wire 0(2)-10VDC / 4(0)-20mA
Feedback To be customized (2 set of passive feedback) 0(2)-10VDC / 4(0)-20mA
Position Signal Position indicator available, observing the opening of the valve at any time.
Rotation Angle 0~90°
Max Current of Aux. Switch 3A    220VAC
Life Span >60,000 times rotation (under rated load)
Noise <45dB
Protection Level II
Protection Degree IP54
Ambient Temperature -10 ~ +50℃
Ambient Humidity 5 ~ 95%RH
Storage Temperature -30 ~ +60℃

Specifications of Valve Body

DN DN15 DN20 DN25 DN32 DN40 DN50
Kv(m³/h) 4.0 4.0 10 16 25 40
Angle Range 0 ~ 90°
Maximum Differential Pressure 0.40MPa
Nominal Pressure PN20
Flow Characteristics Equal percentage
Leakage Rate ≤Kvs*0.01% (2-way), ≤Kvs*1% (3-way)
Medium Temperature -20℃ ~ 120℃
Connection Thread connection
Material of Main Parts Valve body: forged brass
valve core: stainless steel
Seat: Graphite reinforced PTFE
Stem: Stainless Steel

Dimension

DN Connection Thread G H (mm) H1 (mm) L (mm) L1 (mm) D (mm) W(mm)
DN15 G1/2 120 15 60 31 160 85
DN20 G3/4 120 18 70 32 160 85
DN25 G1 122 21 88 44 160 85
DN32 G1-1/4 123 26 101 50 160 85
DN40 G1-1/2 124 30 109 53 160 85
DN50 G2 124 37 125 70 160 85

Wiring of on/off Control

Wiring of Aux. Switch

Proportional Control Type Actuator Wiring

APPLICATION

RELATED NEWS

News Best Thermostats for Hydronic Radiant Floor Heating: A Distributor Guide
On September 10, 2026
Best Thermostats for Hydronic Radiant Floor Heating: A Distributor Guide
Thermostat selection is easy to get wrong in hydronic radiant floor heating. A thermostat may look suitable on the product page but still fail to match the heat…
Learn More
News Where Can Buy Motorized Balancing Valves for Commercial HVAC in Bulk?
On August 24, 2026
Where Can Buy Motorized Balancing Valves for Commercial HVAC in Bulk?
Choosing the right motorized balancing valves for commercial HVAC requires more than comparing unit prices. This article explains key specifications, valve types, actuator options, control signals, application scenarios,…
Learn More
News Which duct air flow sensors support 4 to 20 mA output for building automation?
On August 15, 2026
Which duct air flow sensors support 4 to 20 mA output for building automation?
Learn how duct air flow sensors with 4 to 20 mA output support HVAC building automation, including selection, compatibility, installation, and maintenance.
Learn More

We value your privacy

We use cookies to enhance your browsing experience, serve personalised ads or content, and analyse our traffic. By clicking "Accept All", you consent to our use of cookies.