SRV Series Ductile Cast Iron Intelligent Balance Valve

SRV series intelligent balance valve is integrated with sensors, intelligent actuator and regulation valve. It is applicable to central air conditioning system and heating system. The regulating valve receives the control signals from PLC, DDC and other controllers, compares with the real time values from
local sensors (temperature sensor, pressure sensor, flow sensor, and etc.),and make judgment and adjustment accordingly. Thus it realizes accurate control of the temperature, pressure, flow or energy.

Download
Certification Marks

Features

Remote controllable via upper computer
Programmable with RS-485, automatic opening adjustment
Automatic valve status detection, anti-seize design
Manual operation available

IP67, high protection level. IP68 is customizable

90° rotation, quick opening/closing, good adjustment
performance

Push type terminal block, easy for wiring
Bluetooth available, monitoring via APP on mobile phone

Specifications of Actuator

Torque 50Nm
Power Supply 24VDC
Rated Current 2.4A
Sensitivity ±1.0%
Basic Deviation +1.0% (of valve stroke)
Frequency 50/60 Hz
Dperating Time 20s (0 load, from fully clo sed to fully open)
Cable 0.5mm2 ~ 1mm2
Communication RS-485/ M-bus
Protocol Modbus/188
Control Mode (Only one mode can be selected at the same time) 1 Return temperature control (Basic) 2 Differential temperature control 3 Pressure control 4 Differential pressure control 5 Flow control 6 Energy control
Precision of Temperature Control +1.0°C
Cooling/heating Changeover Automatic (cooling when the water inlet temperature is <35 °C,otherwise heating)
Temperature Sensor DS18B20
Wireless Control Bluetooth, APP (for Android only)
Manual Operation Available
Ambient Temperature 25°C ~ +65 °
Protection Degree IP67 (IP68 customizable)

Specifications of Valve Body

Nominal Pressure PN16
Applicable Medium Hot/cool water, ethylene glycol aqueous solution with concentration s50%
Adjustable Ratio 100:1
Flow Characteristics Equal percentage
Leakage Rate No visible leakage
Stroke Angular stroke (90 ")
Medium Temperature 10°C - 20°C
Mounting On return water side
Material of Main Parts Valve Body Ductile Cast Iron(DN40 -DN150)
Ball SS304
Seat PTFE + Graphite
Stem SS304
O Ring Sealing EPDM

INSTALLATION DIAGRAM

APPLICATION

RELATED NEWS

News DDC Controller: How It Works in HVAC Systems
On October 25, 2026
DDC Controller: How It Works in HVAC Systems
A DDC controller helps HVAC systems maintain indoor comfort while keeping equipment operation under control. In commercial buildings, temperature swings, unnecessary equipment runtime, and constant manual adjustments can…
Learn More
News Motorized Valve: Types, Uses & FCU Selection Guide
On October 15, 2026
Motorized Valve: Types, Uses & FCU Selection Guide
When a room stays too warm even though the fan coil unit is running, the problem may not be the thermostat. Water flow through the coil could be…
Learn More
News CO₂ Sensor for HVAC: Demand Controlled Ventilation and Why Sensor Accuracy Matters
On September 22, 2026
CO₂ Sensor for HVAC: Demand Controlled Ventilation and Why Sensor Accuracy Matters
A CO₂ Sensor can help an HVAC system respond to changes in occupancy instead of running the same ventilation rate all day. Think about a meeting room that…
Learn More

We value your privacy

We use cookies to enhance your browsing experience, serve personalised ads or content, and analyse our traffic. By clicking "Accept All", you consent to our use of cookies.